Products | Precision Reel Engineering

Rocket Bearings

TG's Rocket Bearings

Now available from Precision Reel Engineering, TG's Rocket Bearings replace your standard steel bearings with Ceramic bearings.

Taken from - www.tgrocketfuel.com

"In the US many distance casters were providing excellent reports on a new type of bearing, which had been discovered by reel tuning fanatics who had replaced their standard steel bearings with Ceramic ones, to test if they made any difference to their casting.
They Did.
Not only did the Ceramic Bearings run far smoother and quieter than their steel relatives, but they also appeared to improve casting performance. However the new Ceramic Bearings were far from easy to obtain for most people, were stuffed full of the most awful grease which was very difficult to remove, and there was no way of knowing which bearings were which, and could be very easily be mixed up! However TG Developments are now proud to be able to provide Ceramic Bearings for every distance caster, world wide.
Manufactured to our precise specifications they carry the International ABEC 7 rating, are manufactured DRY, and are stamped on the outside of the cages CB.
Any higher ABEC rating is in our opinion counter productive as too tight a tolerance doesn’t permit our lubricants to function properly
Simply replace the existing Steel Bearings with TG’s Rocket Bearings and treat them in exactly the same manner as the old Steel Bearings. The only difference is the sound, speed and overall performance achieved when casting using TG'S Rocket Bearings."

Please Contact Us for Pricing Details

small product photo

Standard stock sizes (in mm.)

» 3x10x4
» 4x9x4
» 4x10x4
» 4x11x4
» 6x13x5

ABU

All of the following reels with outboard bearings located in the end caps made after 1981 require the same size bearings.

4500C – 4500CB – 4600AL – 4600CB – 5000C – 5600 – 5000CDL – 5001C – 5500C – 5500CA –
5500D 5500DA – 5500ST – 5600A – 5600AL – 5600C – 5600CA – 5600CDL6000C – 6500 – 6500C 6500A – 6500CA – 6500CA – 6500CT – 500ST – 6600C – 7000 – 7000C – 7500C – 7500CT – MAG I – MAG 2 – 321 – 322 – 521 – 522 – XLT1 – XLT2 – U MAG 1 – U MAG II – 1021 – 1022 – 821 – 822 –
PROMAX 1600

All of the following reels with inboard bearings located in the spool require the same size bearings.

MAG III – U MAG III – XLT3 – 323 – 523 – 823

All of the following reels with inboard bearings located in the spool require the same size bearings.

4500 – 5500 – 6500 – 4600 – 5600 – 6600 AB models – 6500CT (from 1990) – ALL ROCKETS, ELITES & SPECIALS – MAG ELITES – SPORTS MAG – BLACK MAX – PRO MAX – 6600 – 6600W – 6500CTM – 6500 MILLENIUM – 6500C3 – 6500C4 – 5500 – 4500 – 6600 – 5600 – 4600 – 6501C – ULTRACAST – 5501C – 6501C4 – 4600C4 MAG – 4600C4 – WINCH – 5600C4 – 5600C4 MAG – 5500 PROSHOP – 5600 PROSHOP – ALSO SOME LATER MAG III models

Shimano

CALCUTTA (All models except CT-50/51 cast cap)
CALCUTTA TE (All models)
CARDIFF (All models)
CURADO & CURADO BSF (All models)
CASTAIC & CASTAIC SF(All models)
CITICA (All models)
CHRONARC (All models)
CHRONARCH SF (All models)
SPEEDMASTER IICFS (All models)

Penn

525 MAG/T

Other products

• TG's Rocket Fuel
• TG's Rocket Bearings
• New Generation Hi-Tech “Carbontex.” Carbon Fibre Drag Friction Washers
• Tournament Grade Anger Pro Dacron I.G.F.A
• Jack Erskine's Bait Rigging Accessories

website design justpurple new media